When replacing nivito , the first thing you need to ask yourself is what size connector you need to use. If the current supply pipe is 1/2 inch, the connector size is 1/2 "It must be one inch. Otherwise, you must use the same 1/3/8 inch outer diameter hose. The outer diameter is 2 inches, but it is a little small. 2 kinds of hose mouth There is a supply of flexible plastic hoses and stainless steel stainless steel pipes. These hoses are interchangeable, but if you want to save money, please choose plastic hoses. Metal piping is stronger than plastic. It is recommended to use stainless steel if it is used to supply heat.
supply line
The supply line is made of soft copper and is located in the center of the tank. The length of time you need to use the connector is determined by this. The diameter of the supply line is 1/2 inch, and the connector is similar to the slip joint.
Compatible with the supply line
At least 1 inch of additional tubing is required to accommodate the hose supply line. Both male and female 3/8 inch fittings are included to extend the hose supply line. The end is connected to the fitting of the short supply line of the mouth.
To prevent twisting and compression, the supply line extension must be at least 1 inch longer than the measured length. You can purchase a standard length extension with a 3/8 inch screw fitting. To connect a short hose mouth to the supply line, just screw a 3/8 inch nut into the male side of the extension.
Connector
The connector is an important part of the piping system. By this, you can connect 2 different components. Depending on the size of your hose mouth, it can be used for cold water and cold water. Make sure that it is tight. This is the most important thing to remember when choosing a water supply. It prevents leakage and keeps your bathroom clean and safe. If it is connected correctly, you can enjoy it using the water road.
To connect the supply line of the hose, it is necessary to measure the distance between the supply line and the supply line. 、It is a simple nut that connects 2 pipes. It is attached to a PVC or copper ratchet-style nut, and it fits the suction port.
:: بازدید از این مطلب : 2
|
امتیاز مطلب : 0
|
تعداد امتیازدهندگان : 0
|
مجموع امتیاز : 0
عضو شوید
عضویت سریع
آمار مطالب
آمار بازدید
